RAPIX Facilities will allow you to:

• Configure and run routine tests of the DALI emergency luminaries
• Configure and run routine tests of all DALI devices.
• Log events.
• Create full test and maintenance repair reports in PDF and CSV format.
• Receive email notification of important events.

A trial version of RAPIX Facilities can be downloaded free from the manufacturer website: https://ozuno.com/dl/rapix-software/#rapix-facilities

For ongoing use it requires a licence, with fees based on the number of DALI lines the software will monitor.

The post RAPIX Facilties Software appeared first on More Lighting.

Key Features

• Easy fit kit to retain modular switch units, helping to ensure vandals have a reduced chance of damaging switches on wall plates.
• Single kit supports both RAPIX Master and Slave switches.
• Suitable for wall plates from Clipsal, Trader and others that have suitable screw holes moulded into the rear.

The post RAPIX LED Modular Switches Anti Vandal Kit appeared first on More Lighting.

Control and monitor many aspects of a RAPIX Lighting Control System
Lighting Levels
Lighting Colour Temperature
Lighting RGB or RGBW colour
Shutter, curtain and blind control
Scenes
System Modes
Enable / Disable features, such as sensors
Edit schedules and scenes
Many theme colours and style options
Multiple pages, with navigation options
Display of images and web-based information (e.g. weather forecast)
Timeout and screen disable options
Password protected access control options
Encrypted configuration and communications
Simple configuration deployment using configuration files (double-click to install)
Licensed software – one-off cost, no cloud servers or later ongoing fees

The post Touch Screen Software appeared first on More Lighting.

A wide range of button functions are supported through RAPIX Integrator software. For example: push and hold to fade up or down; scene control; timers and many other options.

To enable quick and easy installation, the switch connects directly to a RAPIX DALI eHub smart channel, with no need for a separate power supply connection.

Perfect for all commercial & industrial buildings, education facilities, health care facilities, hotels, art galleries, meeting rooms, residential buildings.

The post RAPIX LCD 5 inch Touch Switch – White appeared first on More Lighting.

A wide range of button functions are supported through RAPIX Integrator software. For example: push and hold to fade up or down; scene control; timers and many other options.

To enable quick and easy installation, the switch connects directly to a RAPIX DALI eHub smart channel, with no need for a separate power supply connection.

Perfect for all commercial & industrial buildings, education facilities, health care facilities, hotels, art galleries, meeting rooms, residential buildings.

The post RAPIX LCD 5 inch Touch Switch – Black with E-Hub appeared first on More Lighting.

A wide range of button functions are supported through RAPIX Integrator software. For example: push and hold to fade up or down; scene control; timers and many other options.

To enable quick and easy installation, the switch connects directly to a RAPIX DALI eHub smart channel, with no need for a separate power supply connection.

Perfect for all commercial & industrial buildings, education facilities, health care facilities, hotels, art galleries, meeting rooms, residential buildings.

The post RAPIX LCD 5 inch Touch Switch – White with E-Hub appeared first on More Lighting.

A wide range of button functions are supported through RAPIX Integrator software. For example: push and hold to fade up or down; scene control; timers and many other options.

To enable quick and easy installation, the switch connects directly to a RAPIX DALI eHub smart channel, with no need for a separate power supply connection.

Perfect for all commercial & industrial buildings, education facilities, health care facilities, hotels, art galleries, meeting rooms, residential buildings.

The post RAPIX LCD 5 inch Touch Switch – Black appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Slave Switch – Diva Push Button appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Master Switch – Diva Push Button appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Slave Switch – Rotary appeared first on More Lighting.