This is especially useful to eliminate unwanted sensor detection due to movement past doorways, windows, air conditioning ducts and similar scenarios.

The post DALI-2 Sensors Field of View Mask appeared first on More Lighting.

Key Features

• Available in either white or black variants.
• Suitable for mounting over a conduit box, or directly to a surface
• 4 x conduit entry knock-outs to suit conduit up to 21 mm diameter
• Elongated mounting holes to accommodate distortion in mounting boxes / screw location

The post DALI-2 Sensors Surface Mount Adaptor – Black appeared first on More Lighting.

Key Features

• Available in either white or black variants.
• Suitable for mounting over a conduit box, or directly to a surface
• 4 x conduit entry knock-outs to suit conduit up to 21 mm diameter
• Elongated mounting holes to accommodate distortion in mounting boxes / screw location

The post DALI-2 Sensors Surface Mount Adaptor – White appeared first on More Lighting.

Also includes DALI-2 Application Controller to allow advanced control functions.

Suitable for DALI and DALI-2 systems.

The post DALI-2 IP65 Outdoor Light Level Sensor appeared first on More Lighting.

The RAPIX Long Range Occupancy Sensor allows all common movement / occupancy operations as well as light level sensing and light level maintenance. Switching and control functions are available using the voltage-free input.

This sensor can act as a miniature DALI Application Controller. Multiple sensors can easily be used to expand coverage to larger areas. For further scalability, the sensor can be mixed on a line with RAPIX eHubs or the RAPIX Universal Switch Input. For an installation that spans multiple DALI lines, scaling up is easy using a RAPIX Zone Controller.

The sensor can be enabled or disabled based on a DALI short address, or by system rules managed by a Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast.

Functions available include occupancy (unconditional), occupancy (when light level above a limit), vacancy, light level maintenance and light level switch.

When turning a Zone off, the occupancy / timer functions include fade off, fade to a dwell level before turn off, or pulse before turn off. The sensor can also keep an area on while adjacent areas are on, allowing easy setup of corridor or exit path lighting.

The separate switch input allows connection of voltage-free toggle switches or common push-style momentary switches. Alternatively the voltage-free contacts of a separate low-cost movement sensor can be connected to this input. This input has over 20 possible functions that can be selected. If a suitable function is not supported, Ozuno can create a custom function that is instantly deployed using RAPIX Addressing or RAPIX Integrator software.

This sensor also supports sophisticated scene control, and allows easy scale up where additional sensors can act as slaves to a master sensor.

The post DALI-2 24m IP65 Long Range Occupancy / Light Level Sensor appeared first on More Lighting.

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, allowing sophisticated reaction to be configured for movement detection, light level readings, and the switch inputs. Multiple devices can easily be used on a single DALI line.

The internal Application Controller is commissioned using RAPIX Integrator or RAPIX Addressing software.

Multiple sensors can easily be used to expand coverage to larger areas.

The sensor can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast.

Functions available include occupancy (unconditional), occupancy (when light level above a limit), vacancy, light level maintenance and light level switch.

When switching a Zone off, the occupancy / timer functions include fade off, fade to a dwell level before turn off, or pulse before turn off. The sensor can also keep an area on while adjacent areas are on, allowing easy setup of corridor or exit path lighting.

The separate switch input allows connection of voltage-free toggle switches or common push-style momentary switches. Alternatively the voltage-free contacts of a separate low-cost movement sensor can be connected to this input.

This sensor also supports sophisticated scene control, and allows easy scale up where additional sensors can act as slaves to a master sensor.

An IP-rated version of this sensor is also available.
Accessories

Surface Mount Adaptor

Field of View Mask

The post DALI-2 24m Long Range Occupancy / Light Level Sensor appeared first on More Lighting.

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, allowing sophisticated reaction to be configured for movement detection, light level readings, and the switch inputs. Multiple devices can easily be used on a single DALI line.

The internal Application Controller is commissioned using RAPIX Integrator or RAPIX Addressing software.

Multiple sensors can easily be used to expand coverage to larger areas.

The sensor can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast.

Functions available include occupancy (unconditional), occupancy (when light level above a limit), vacancy, light level maintenance and light level switch.

When switching a Zone off, the occupancy / timer functions include fade off, fade to a dwell level before turn off, or pulse before turn off. The sensor can also keep an area on while adjacent areas are on, allowing easy setup of corridor or exit path lighting.

The separate switch input allows connection of voltage-free toggle switches or common push-style momentary switches. Alternatively the voltage-free contacts of a separate low-cost movement sensor can be connected to this input.

This sensor also supports sophisticated scene control, and allows easy scale up where additional sensors can act as slaves to a master sensor.
Accessories

Surface Mount Adaptor

The post DALI-2 8m Occupancy / Light Level Sensor – Black appeared first on More Lighting.

Radically low DALI power consumption: only 2 mA.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, allowing sophisticated reaction to be configured for movement detection, light level readings, and the switch inputs. Multiple devices can easily be used on a single DALI line.

The internal Application Controller is commissioned using RAPIX Integrator or RAPIX Addressing software.

Multiple sensors can easily be used to expand coverage to larger areas.

The sensor can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast.

Functions available include occupancy (unconditional), occupancy (when light level above a limit), vacancy, light level maintenance and light level switch.

When switching a Zone off, the occupancy / timer functions include fade off, fade to a dwell level before turn off, or pulse before turn off. The sensor can also keep an area on while adjacent areas are on, allowing easy setup of corridor or exit path lighting.

The separate switch input allows connection of voltage-free toggle switches or common push-style momentary switches. Alternatively the voltage-free contacts of a separate low-cost movement sensor can be connected to this input.

This sensor also supports sophisticated scene control, and allows easy scale up where additional sensors can act as slaves to a master sensor.

A Black version, and a Long Range version are also available.
Accessories

Surface Mount Adaptor

Field of View Mask

The post DALI-2 8m Occupancy / Light Level Sensor appeared first on More Lighting.

Radically low DALI power consumption: only 2 mA.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, allowing sophisticated reaction to be configured for movement detection and the switch inputs. Multiple devices can easily be used on a single DALI line.

The internal Application Controller is commissioned using RAPIX Integrator or RAPIX Addressing software.

Multiple sensors can easily be used to expand coverage to larger areas.

The sensor can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast.

Functions available include occupancy (unconditional), and also vacancy.

When switching a Zone off, the occupancy / timer functions include fade off, fade to a dwell level before turn off, or pulse before turn off. The sensor can also keep an area on while adjacent areas are on, allowing easy setup of corridor or exit path lighting.

The separate switch input allows connection of voltage-free toggle switches or common push-style momentary switches. Alternatively the voltage-free contacts of a separate low-cost movement sensor can be connected to this input.

This sensor also supports sophisticated scene control, and allows easy scale up where additional sensors can act as slaves to a master sensor.
Accessories

Surface Mount Adaptor

Field of View Mask

The post DALI-2 8m Occupancy Sensor appeared first on More Lighting.

An input connection allows a RAPIX LED Modular Slave Switch to be connected for use as a movement sensor / switch combination.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, allowing sophisticated reaction to be configured for movement detection, light level readings, and the switch input. Multiple devices can easily be used on a single DALI line.

The internal Application Controller is commissioned using RAPIX Integrator or RAPIX Addressing software.

Multiple sensors can easily be used to expand coverage to larger areas.

The sensor can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast.

Functions available include occupancy (unconditional), occupancy (when light level above a limit), vacancy, light level maintenance and light level switch.

When switching a Zone off, the occupancy / timer functions include fade off, fade to a dwell level before turn off, or pulse before turn off. The sensor can also keep an area on while adjacent areas are on, allowing easy setup of corridor or exit path lighting.

This sensor also supports sophisticated scene control, and allows easy scale up where additional sensors can act as slaves to a master sensor.

The post DALI-2 Miniature Occupancy and Light Level Sensor – Black appeared first on More Lighting.