The post UK Switch Wall Plate appeared first on More Lighting.

Key Features

• Easy fit kit to retain modular switch units, helping to ensure vandals have a reduced chance of damaging switches on wall plates.
• Single kit supports both RAPIX Master and Slave switches.
• Suitable for wall plates from Clipsal, Trader and others that have suitable screw holes moulded into the rear.

The post RAPIX LED Modular Switches Anti Vandal Kit appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Slave Switch – Diva Push Button appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Master Switch – Diva Push Button appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Slave Switch – Rotary appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Master Switch – Rotary appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Slave Switch – Classic Push Button appeared first on More Lighting.

Three switch styles are available and all come in Master or Slave versions.

Master switches connect directly to the DALI Line. Slave switches connect to a Master switch.

Each Master switch can connect a single Slave. Push Button and Rotary Master and Slave types can be mixed and matched.

Each modular (Master and Slave) includes a white software configurable LED indicator.
DALI-2 Systems

This devices is suitable for use in any DALI-2 system, and it can be set up using any software that commissions DALI-2 input devices.

When used in other DALI-2 systems, the internal application controller should be disabled.
RAPIX Systems

This product can optionally act as a miniature DALI Application Controller, which can be commissioned using RAPIX Integrator or RAPIX Addressing software.

When the internal Application Controller is used with setup by RAPIX commissioning software, the switches can perform a wide range of functions. The switch can be enabled or disabled based on a DALI short address, or by system rules managed by a RAPIX Zone Controller.

Like other RAPIX Application Controllers a Zone approach is used. Zones are made up of a mix of DALI Short Addresses, Groups, or the DALI broadcast. When multiple switches are used with RAPIX Application Controller enabled, all RAPIX input devices cooperate to create a DALI-2 lighting control system with enhanced resilience.
Accessories

Anti-Vandal Kit

Coloured Rings, Bezels, Black Dials

The post DALI-2 LED Modular Master Switch – Classic Push Button appeared first on More Lighting.

For the added resilience of RAPIX, the switch input unit allows 40-series push buttons to act as RAPIX DALI-2 Application Controllers, performing switching, dimming, timing, group control, scene control and similar functions.
DALI System Commissioning

This product is set up using any DALI-2 commissioning software that supports DALI-2 Control Device instance types 1 (push buttons) and feature type 32 (feedback). For the higher resilience of RAPIX and to use the built-in Application Controller, the free RAPIX Addressing or RAPIX Integrator software should be used.
DALI-2 Instances

The product has 4 instances, all are Type 1 Push Button.

All instances are always present, irrespective of whether a Clipsal 5041NMS is physically connected or not. If an input has nothing connected, then that instance is present but has no effect.

This product range also supports DALI-2 Feature Type 32 (Feedback on Instance Level) for indicator control. Each instance can have the red or blue indicator selected according to configuration settings and DALI-2 commands
RAPIX Zero-Commissioning: Out-of-box Functions

This product supports RAPIX Zero-Commissioning out-of-box functions:

Push / release to transmit Broadcast ON/OFF. Push and hold to DIM UP/DOWN & release to terminate the dimming.

Connecting to the DALI Line

The DGOZ-IC-4 includes a 2-wire cable to allow connection to a DALI line.
Connecting the 5041NMS

A Clipsal 5041NMS has a ribbon cable with connector. This plugs directly into a socket on the RAPIX DALI-2 40-series Switch Input.
DALI-2 Feature 32 Capabilities

This product has the following capabilities:

feedbackCapability: Bit 6: common brightness control.
feedbackActiveBrightness and feedbackInactiveBrightness are binary: brightness is either on or off.
feebackColourCapability supports R and B, with 1-bit resolutions (Red and Blue). Combinations of Red and Blue are not possible.
Feedback is only supported for “Feature on Instance Level”.
Although both Red and Blue LEDs may be activated, only one or the other may be active on an instance at any time. Mixing of colours is not supported.

Important Notes:

Clipsal and Iconic are trademarks or brands of Schneider Electric (Australia) Pty Ltd.

5041NMS is an orderable part number of Schneider Electric (Australia) Pty Ltd.

The post DALI-2 40-series Switch Input – 4 Gang appeared first on More Lighting.

For the added resilience of RAPIX, the switch input unit allows 40-series push buttons to act as RAPIX DALI-2 Application Controllers, performing switching, dimming, timing, group control, scene control and similar functions.
DALI System Commissioning

This product is set up using any DALI-2 commissioning software that supports DALI-2 Control Device instance types 1 (push buttons) and feature type 32 (feedback). For the higher resilience of RAPIX and to use the built-in Application Controller, the free RAPIX Addressing or RAPIX Integrator software should be used.
DALI-2 Instances

The product has 2 instances, all are Type 1 Push Button.

All instances are always present, irrespective of whether a Clipsal 5041NMS is physically connected or not. If an input has nothing connected, then that instance is present but has no effect.

This product range also supports DALI-2 Feature Type 32 (Feedback on Instance Level) for indicator control. Each instance can have the red or blue indicator selected according to configuration settings and DALI-2 commands
RAPIX Zero-Commissioning: Out-of-box Functions

This product supports RAPIX Zero-Commissioning out-of-box functions:

Push / release to transmit Broadcast ON/OFF. Push and hold to DIM UP/DOWN & release to terminate the dimming.

Connecting to the DALI Line

The DGOZ-IC-2 includes a 2-wire cable to allow connection to a DALI line.
Connecting the 5041NMS

A Clipsal 5041NMS has a ribbon cable with connector. This plugs directly into a socket on the RAPIX DALI-2 40-series Switch Input.
DALI-2 Feature 32 Capabilities

This product has the following capabilities:

feedbackCapability: Bit 6: common brightness control.
feedbackActiveBrightness and feedbackInactiveBrightness are binary: brightness is either on or off.
feebackColourCapability supports R and B, with 1-bit resolutions (Red and Blue). Combinations of Red and Blue are not possible.
Feedback is only supported for “Feature on Instance Level”.
Although both Red and Blue LEDs may be activated, only one or the other may be active on an instance at any time. Mixing of colours is not supported.

Important Notes:

Clipsal and Iconic are trademarks or brands of Schneider Electric (Australia) Pty Ltd.

5041NMS is an orderable part number of Schneider Electric (Australia) Pty Ltd.

The post DALI-2 40-series Switch Input – 2 Gang appeared first on More Lighting.